Createx UVLS 4053 High Gloss 120ml

Water-based, acrylic aliphatic polyurethane High Gloss Coat
The most high-gloss clear coat, suitable for all surfaces such as plastics, wood, metal and even glass.
For an high gloss finsh you need to polish the paint when dry.
For indoor and outdoor use (allow to dry for 48 hours)
Use an 2K clear coat for finishing motorcycles, cars ect.

Can be used in combination with all Createx paints.
UVLS = Ultra-Violet Light Stabilizer protects underlying paint layers against UV radiation.
Very good to use on sensitive colors such as Fluor and Candy's
Can also be used as a bonding primer directly on metal, brass and steel without fear of rusting
But also on plastic, 3D PLA, Polycarbonate, styrene, etc. and other difficult to spray surfaces.
Or as an intercoat clear between the layers of paint or if you have to tape a lot.
Allow the UVLS Gloss to air dry on smooth and non-sanded surfaces for 48 hours for best adhesion.

4050 Gloss Clear is the recommended binder to mix with Candy2o
Mix the 4050 UVLS Gloss 3: 1 with concentrated Candy2o and further prepare it with Reducer 4011
Let the paint rest for 10 minutes before use.

Createx UVLS 4050 Gloss Coat can be diluted with 5-10% Reducer 4011.