High quality SprayMax aerosol filled with the K-tone paint.
These are professional aerosols with an professional result.
BACKGROUND:
Best is an highgloss black.
CHROME PAINT:
Shake well before use. Spray very thin passes with a spraygun with small nozzle size (0.5~1.0mm) and a low pressure (2 bars), reducing the paint flow at the maximum (press slightly on the trigger) and by letting the air escape, until you reach maximum chrome effect.
Allow a few seconds between each pass to let dry, and observe the formation of the chrome during evaporation. Make the coats not too thick. Between each dry pass, the surface can be polished with a piece of cotton to remove any dust or smudge.
Too much chrome paint will turn in an silver results.
High quality SprayMax aerosol filled with the House of Kolor paint.
These are professional aeroslos with an professional result.
DRYING:
Chrome paint dries immediately, but it's advised to let stand to dry for at least 24h at ambient temperature. The longer it dries (up to 14 days), the more the chrome becomes harder and more resistant, which will allow an easier topcoating if you choose to clear.
TOPCOATING:
Topcoating requires a special technique: Spray 4 thin coats of clearcoat, allow 1 to 2 minutes between each pass.
The thinner the coats are, the better the results.
These products are solvent based, we recommend using a spray mask in a well ventilated area.
400ml
